Bosch Rexroth Sytronix products and solutions
Depending on the power and function constraints of your machine, three solutions are at your disposal. The range is very adaptable and is of modular construction. It uses several pump technologies and covers a wide range of powers, ranging from 1.5 kW to 630 kW.
FcP 5000 - Performance adapted to your needs
On a traditional hydraulic circuit, the variable displacement pump is coupled to an electric engine and operates at its nominal speed. The oil requirements of the hydraulic system are regulated by the internal mechanism of the pump.
With the FcP 5000 the flow required by the hydraulic circuit is supplied by a motor pump unit driven by a frequency converter.
The FcP 5000 is ideal for machine tool applications.
- Flow rate up to 55 l / min
- Pressure up to 170 bar
- Power up to 7.5 kW
- Speed from 100 to 2,500 rpm
The DFEn 5000 is designed around a variable displacement axial piston servo pump. This is driven by the combination of a frequency converter and an asynchronous motor. The digital controller of the pump servo control is integrated in the servo valve which controls the pump displacement. The latter calculates the optimum drive speed of the servo motor..
It can be used effectively in moulding applications.
- Speed variator /li>
- Axial piston pump
- Frequency converter
- Standard asynchronous motor
Very high performance
With the SvP 7000, the flow required by the hydraulic circuit is supplied by a fixed displacement pump driven by the combination of a servomotor with an intelligent servo inverter..
Thanks to its dynamics, accuracy, repeatability and the flexibility of its digital controllers, the SvP is used for high-performance servo drives. .
Enjoy the performance of the SvP 7000 for your press brake and injection moulding applications.
- Power up to 60 kW
- Pressure up to 315 bar
- Speed from 0 to 3000 rpm
- Complete sets already configured up to 190 L / min